基于ABAQUS的显式动力学分析方法研究

显式动力学(The Explicit Dynamic)是针对隐式求解器的一个补充,其分析方法对于求解广泛、各类非线性结构力学问题是一个非常有效的工具,显式方法中的单个增量步取决于模型的最高固有频率,与持续时间、载荷类型无关。ABAQUS/Explicit主要用于碰撞、接触以及失效分析。探讨了ABAQUS显式动力学的基本理论、求解的问题,对显示动力学分析方法中的求解算法、稳定时间极限和能量平衡问题进行研究,给出了显示动力学分析的一般性分析方法。通过案例验证了该方法的可行性,应用该方法可有效解决实际工业生产中的碰撞问题、复杂的接触问题以及复杂的后屈曲问题,可为显式动力学分析方法应用于工程实践奠定理论与方法基础。     

Time series forecasting with a neuro-fuzzy modeling scheme

Time series forecasting concerns the prediction of future values based on the observations previously taken at equally spaced time points. Statistical methods have been extensively applied in the forecasting community for the past decades. Recently, machine learning techniques have drawn attention and useful forecasting systems based on these techniques have been developed. In this paper, we propose an approach based on neuro-fuzzy modeling for time series prediction. Given a predicting sequence, the local context of the sequence is located in the series of the observed data. Proper lags of relevant variables are selected and training patterns are extracted. Based on the extracted training patterns, a set of TSK fuzzy rules are constructed and the parameters involved in the rules are refined by a hybrid learning algorithm. The refined fuzzy rules are then used for prediction. Our approach has several advantages. It can produce adaptive forecasting models. It works for univariate and multivariate prediction. It also works for one-step as well as multi-step prediction. Several experiments are conducted to demonstrate the effectiveness of the proposed approach.     

Receding horizon time-optimal control for a class of differentially flat systems

A closed-loop, time-optimal path-following control scheme is proposed for a class of constrained differentially flat systems. Within a receding horizon framework, a finite horizon optimisation problem is solved at each sample, using available state feedback and feedforward path information. Irrespective of horizon length, the proposed formulation guarantees exact path-following. Moreover, the requirements under which the proposed algorithm achieves minimum-time path-following are established. Simulations conducted with a rigid X–Y table model confirm the theoretical results.     

Concise dynamic model to accurately calculate the hydrogen yield during the reaction process

Estimation of hydrogen production rate and the total amount hydrogen during any reaction process require an accurate and concise dynamic model to describe the variation of hydrogen production rate with reaction time. There must be two comprehensive features of such model, the first one is that the hydrogen production rate calculated by this model is zero at the initial time is zero and the second one is that the integration of this model over time result in an explicit function. In this paper, we present a comprehensive model which meets above two requirements via amendments to the shifted logistic model. The model is validated against measured results through comparison of 25 experimental and theoretical hydrogen production rate. The experimentally validated model is used to calculate the total amount hydrogen during each reaction process. The impact of some experimental conditions on the total hydrogen production was mathematically explained for the first time, and this result reveal the excellent predictive ability of framework suggested in this paper. In addition, that is for an experimental condition history, predictions are achieved by developing a set of “secondary models” that describe some experimental conditions dependence of the “primary models” parameters. The method to obtain the parameters in “secondary models” described in this paper indicated that another major departure from the conventional models is the notion that the “secondary models” do not need to follow any preconceived formula and that they can be derived solely from the observed growth patterns. The presented framework can help the hydrogen production industry.     

Why stop after 20 minutes? Breaks and target prevalence in a 60-minute X-ray baggage screening task

Current EU regulation restricts continuously reviewing X-ray images of passenger baggage to 20-min duration as a precautionary measure to prevent performance decrements in airport security officers (screeners). However, this 20-min limit is not based on clear empirical evidence on how well screeners can sustain their performance over time. Our study tested screeners in a 60-min simulated X-ray cabin baggage screening task. One group took 10-min breaks after 20 min of screening; the other group worked without breaks. We found no decrease in performance over 60 min in either group. Breaks did not affect performance, but they did reduce the amount of subjective distress. By varying target prevalence, we found that d_a with a slope of about 0.6 is a more valid measure of detection performance than d'. Target prevalence caused a criterion shift. Our results provide a basis for conducting field studies of prolonged screening durations, and open the discussion on whether more flexible break policies and work schedules should be considered.     

Steel slag waste combined with melamine pyrophosphate as a flame retardant for rigid polyurethane foams

To explore the potential application of industrial waste, steel slag powder in combination with melamine pyrophosphate (MPP) was adopted to improve the flame retardancy of rigid polyurethane foam (RPUF). The incorporation of steel slag slightly reduced the thermal conductivity of the resulting flame-retardant RPUF samples. The addition of MPP and/or steel slag did not significantly alter the thermal stability in terms of T_-10% and T_max but did obviously increase the T_-50% value, suggesting the improved thermal resistance of the residues. The coaddition of MPP and steel slag into RPUF resulted in higher LOI values and lower peak heat release rates than the samples incorporating either MPP or steel slag alone. The superior flame retardancy could be attributed to MPP promoting char formation, which then acted as a barrier at the beginning of RPUF thermal decomposition; simultaneously, the thermally stable inorganics in the steel slag powder strengthened the thermal resistance of this char layer.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Quantitative relationship between time margin and human reliability

Operator reliability in complex systems is influenced by various performance shaping factors (PSFs). Time is a particularly important PSF; however, empirical studies of human reliability analysis (HRA) are rarely focused on modeling the effect of time PSF on human error probability (HEP). This study contributes to HRA literature by investigating the empirical relationship between time margin and HEP. Time margin is defined as the difference between the time available to complete a task and the time required to successfully complete the task, divided by the required time. We investigate and compare two models (logistic and linear) to explain HEP based on time margin. The empirical HEP data for model testing were extracted from a microworld simulator (Study 1) and a full-scope simulator (Study 2) in two existing studies relevant to procedural tasks in nuclear power plants. For Study 1, both models exhibited an acceptable, equivalent explanatory power; for Study 2, although both models exhibited an acceptable explanatory ability, the logistic model explained more variance in HEP. Our findings indicate the potential of the logistic model in explaining and predicting HEP based on time margin in time-critical tasks.     

冷挤压对高合金化7000系铝合金抗腐蚀性能的影响

研究了经固溶-时效和固溶-冷挤压-时效处理的高合金化Al-12.3Zn-3Mg-2.5Cu-0.18Zr-0.07Sr铝合金的微观组织与抗腐蚀性能。结果表明:固溶-时效和固溶-冷挤压-时效状态下高合金化铝合金的晶粒都呈现明显的带状分布,但固溶-冷挤压-时效状态下合金内部亚晶比例明显上升;相比固溶-时效,固溶-冷挤压-时效状态下高合金化铝合金的抗腐蚀性能(剥落腐蚀和晶间腐蚀)有明显的提高,可见冷挤压变形是提高7000系铝合金腐蚀性能的有效手段。